Spilled Water on Your MacBook? Do This Immediately to Save It

One second, you’re sipping your coffee — and the next, it’s all over your MacBook. Maybe the cup slipped. Maybe your dog jumped up. Or maybe it was just bad luck. Whether the screen stays on or instantly goes black, liquid damage to your MacBook can be catastrophic. Those next few seconds matter more than you think.

Don’t panic—and definitely don’t press any keys. In this step-by-step guide, I’ll show you exactly what to do if you spill water—or any liquid—on your MacBook and how to maximize your chances of saving it.

Immediate Actions to Take Right After Spilling Water on Your MacBook

The first few moments after the spill are crucial. What you do (or don’t do) can make all the difference.

1. Power Down Your MacBook Immediately

The moment any liquid touches your MacBook, your first action should be to power it off—and fast. Hold down the power button for 5 to 10 seconds until the screen turns off.

FaceTime Like a Pro:

Get our exclusive Ultimate FaceTime Guide 📚 — absolutely FREE when you sign up for our newsletter below.

Don’t try to save files or shut it down properly using the Apple menu. Every extra second the device stays powered increases the risk of a short circuit and internal damage.

2. Disconnect All Accessories and Power Sources

Next, unplug everything connected to the MacBook. Start with the charger, as electricity and water can be a dangerous combo. Then remove any connected peripherals like USB drives, headphones, SD cards, or HDMI cables.

If you’re using a hub or dock, unplug that too. You want to isolate the device completely to avoid any power flow.

3. Invert the MacBook to Drain Excess Water

Flip the MacBook open to a 90-degree angle and set it in an upside-down “V” position with the keyboard facing down. This lets gravity draw the liquid out. Use a soft cloth to gently dab visible moisture, especially around the keyboard, trackpad, and ports. Don’t press or shake it.

Set the MacBook on a flat, dry surface in a cool and well-ventilated room. Avoid direct sunlight or heat sources like dryers and radiators—they can warp components. If possible, surround it with silica gel packs to absorb moisture.

Skip the rice; it’s less effective and can cause more harm if it gets inside the ports.

How Long Should You Wait Before Turning It Back On?

Fully drying your MacBook takes time, and patience is key.

• For minor water spills, wait at least 48 hours before attempting to power it on.
• The wait should be extended to 72 hours or more for larger spills or liquids containing sugar (like coffee, juice, or soda).

These types of spills can leave behind sticky residue even after the water has evaporated, increasing the risk of corrosion. As tempting as it is, resist the urge to check if your MacBook is working too early. Trying to power on your MacBook before it’s completely dry can short the internal components and lead to permanent damage.

What Not to Do After Spilling Water on Your MacBook

When water hits your MacBook, the panic response often leads to the wrong actions. Knowing what not to do is just as important as knowing what to do.

• Don’t press any keys to check if it still works. This can push water deeper inside and short internal components.
• Don’t plug it in to see if it charges. Water and electricity can instantly damage the logic board.
• Avoid hairdryers or vacuums. Heat can warp the device, and static discharge can do more harm than water.
• Don’t turn it on too early. Even if it looks dry, lingering moisture can silently corrode parts over time.
• Never shake the MacBook. It won’t help and may move the liquid into areas that were unaffected.

Let gravity and time do the work. Drying the right way is safer and gives your MacBook a better shot at recovery.

When to Seek Professional Help

If your MacBook doesn’t turn on after 72 hours or shows signs like:

• Black screen
• Keyboard or trackpad not working
• Audio distortion
• Random shutdowns
• Overheating or noisy fans

These are common symptoms of underlying damage caused by moisture or corrosion on the logic board.

DIY drying methods are fine for small spills, especially if the MacBook is shut down quickly and the liquid is plain water. But if the spill involves sugary or sticky drinks, or if the device doesn’t boot up after drying, professional help is the safer and smarter option. Opening the MacBook yourself is risky unless you know exactly what you’re doing and have the right tools.

It’s always better to get your MacBook checked by a certified Apple technician or a trusted repair center as soon as you notice something off. Internal corrosion can take days or weeks to spread, slowly ruining components that could have been saved. And remember, the earlier the inspection, the greater the chance of recovery and the lower the repair cost.

What to Expect During a MacBook Water Damage Repair

Once you take your MacBook to a repair center, here’s what usually happens depending on the extent of the damage:

• Most Apple Stores won’t cover liquid damage repairs unless you have AppleCare+ with accidental damage protection.
• Independent repair shops may offer ultrasonic cleaning, board-level repair, or full-part replacements.
• The costs vary widely depending on the damage—from $100 for cleaning to $1,200+ for full logic board replacement.

Tips to Prevent Water Damage to Your MacBook in the Future

Spilling water once is unfortunate. Doing it twice? That’s avoidable. Here are some easy ways to protect your MacBook from another liquid disaster:

1. Keep drinks away from your workspace. Even if you’re careful, all it takes is one slip or bump.
2. Use a waterproof keyboard cover. It adds a layer of protection against accidental splashes.
3. Use a laptop stand to elevate your MacBook slightly above the desk—it helps protect it from spills and improves airflow.
4. Consider AppleCare+ or device insurance. If you know you’re prone to accidents, it could save you thousands.
5. Avoid using your MacBook near sinks, bathtubs, or outdoor areas without shelter. Humid environments and unexpected splashes are risky.
6. When carrying your MacBook in a bag, store it in a padded, waterproof case. Leaking water bottles are a common cause of liquid damage.
7. Keep a microfiber cloth nearby. It won’t stop a spill, but it helps you react faster if one happens.

These habits are easy to adopt and could make the difference between a close call and a costly repair.

Cleaning and Disinfecting Your MacBook Post-Spill

After you’ve dried the MacBook and confirmed there’s no moisture inside, it’s time to clean and disinfect it. This helps remove any residue and ensures your device stays safe to use.

• Gently wipe the exterior using a microfiber cloth that’s slightly damp.
• Use 70% isopropyl alcohol to clean sticky or oily spots, especially if sugary drinks were involved. Apply the alcohol to the cloth—not directly on the device.
• Clean around the keyboard and ports using a soft brush, toothpick (gently), or compressed air to dislodge any debris.
• Disinfect commonly touched areas like the keyboard and trackpad with alcohol wipes (again, not soaking wet).
• Inspect for leftover residue or signs of corrosion, especially near the ports, vents, and speaker grills.

This final cleanup ensures your MacBook is not only dry but safe and pleasant to use again.

Video: Spilled Water on Your MacBook? Here’s EXACTLY What to Do!

Handle Spills Like a Pro and Keep Your MacBook Safe

Spilling water on a MacBook is terrifying but not always fatal. Act quickly, dry it properly and resist the urge to power it on too soon. If you’re lucky, it might survive without issues. If not, at least you gave it the best possible shot.

Don’t miss these related reads:

• How to use Water Lock on Apple Watch to eject water
• Dropped your AirPods in water? 7 Ways to Save Them
• How to get water out of iPhone speakers